Trimming the Overhang, Part 2

 

Here are some photos of the trimmed soundbox!!!! One thing I did notice today was really weird but kind of neat. I had my little TV on in the guitarmaking room. As I was handling the soundbox, I could feel the top vibrate from the sound of the TV. I suppose that's good, right? That must mean that the top is quite responsive!!! That might be a good sign for this guitar!!!!

 

 

 

 

 

 

 

 

 

 

 

 

 

INDEX:

Return to HOME PAGE

  2. A Little Detour....A Tour of My Workroom!!!
  3. Joining the Top
  4. Starting to Bend
  5. Bending, Day 2
  6. Bending, Day 3
  7. Neck Block, Center Strip, Cutaway!
  8. Bracing the Back, Gluing in the Blocks
  9. Shape Back Braces, Glue Neck Block, Make Spreaders
  10. Spreader, Rim, Kerfing
  11. Rim-Sanding, Brace-Shaping, Go-Bar Modification, & Obon!!!
  12. Side Strips & Rosette
  13. Beginning the Top Bracing
  14. Bracing, Continued...
  15. Gluing the Back
  16. Gluing the Top
  17. Trimming the Overhang
  18. Routing for Binding : Day 1
  19. Routing for Binding : Day 2
  20. Fitting & Gluing the Bindings
  21. The Soundbox is Done!!!
  22. Truss Rod Slot, Peghead Veneer
  23. Peghead, Start Heel
  24. Threaded Inserts, Neck Trimmed
  25. Fitting the Neck!!!
  26. Truss Rod Cavity, Heel Cap, Fingerboard Trimmed
  27. Finishing and Gluing the Fingerboard / Peghead Inlay
  28. Carving the Neck
  29. I Feel Good....The Basic Building is Done!!! (Now on to the Finishing....)
  30. Pore-Filling
  31. Sealing
  32. Finish Coats
  33. Finishing the Finish!!!
  34. Gluing the Bridge
  35. It's All Done!!!

 

 

 

 

 

 

 

  

 

 

 

Previous Page

Next Page